Meyer Sound UPM-2XP-3, 2x5" Active Speaker, 3-Pin Input

Meyer Sound UPM-2XP-3, 2x5" Active Speaker, 3-Pin Input

The Meyer Sound UPM-2XP-3, with IntelligentDC technology, is a compact, externally-powered, narrow-coverage loudspeaker for professional sound reinforcement. It offers the same high sound pressure levels, low distortion, and uniform directional control as the Meyer Sound UPM-2XP-3 but with the added flexibility of external DC power and support for lengthy cable runs without AC conduits. The Meyer Sound UPM-2XP-3 is ideally suited for narrow-coverage applications requiring a small, inconspicuous cabinet where AC cabling is not feasible. As a standalone loudspeaker, the Meyer Sound UPM-2XP-3 can be used for vocal reinforcement, frontfill coverage, or delay coverage for underbalcony applications. For full-range systems, the Meyer Sound UPM-2XP-3 can be paired with Meyer Sound’s UMS‑1XP ultracompact subwoofer with IntelligentDC technology. With IntelligentDC technology, the Meyer Sound UPM-2XP-3 receives DC power and balanced audio from a single loudspeaker connector. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems.

Meyer Sound UPM-2XP-3 Main Features

• IntelligentDC technology affords the flexibility of lengthy cable runs without AC conduits
• Extraordinary fidelity and power capability come together in an ultracompact package
• Metal dome tweeter delivers a smooth high-frequency response
• Narrow, symmetrical pattern provides precise coverage control
• Unique crossover design eliminates combing and yields a consistent midrange response
• Exceptional SPL to size ratio supports a variety of applications

• Acoustic
• Operating Frequency Range: 80Hz – 20kHz
• Frequency Response: 85Hz – 19kHz ±4dB
• Phase Response: 300Hz – 18kHz ±60°
• Linear Peak SPL: 123dB with 18dB crest factor (M-noise), 120dB (Pink noise), 120.5dB (B-noise)
• Coverage
• Horizontal Coverage: 45°
• Vertical Coverage: 45°
• Transducers
• Low Frequency: Two 5-inch cone drivers; 8Ω nominal impedance
• High Frequency: One 1-inch metal dome tweeter; 8Ω nominal impedance
• Audio Input
• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
• Connectors: Phoenix 5-pin Male; SwitchCraft 5-pin Male; ECO-M 7-pin Male (two pins for 48VDC power, three pins for balanced audio)
• Input Impedance: 10kΩ differential between positive (+) and negative (-) audio pins
• Wiring
• Phoenix 5-pin Male
• Pin 1: DC Power (-)
• Pin 2: DC Power (+)
• Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 4: Audio (-)
• Pin 5: Audio (+)
• SwitchCraft EN3 5-pin Male
• Pin 1: DC Power (-)
• Pin 2: DC Power (+)
• Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 4: Audio (-)
• Pin 5: Audio (+)
• ECO-M 7-pin Male
• Pin 1: DC Power (-)
• Pin 2: DC Power (+)
• Pin 3: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 5: Audio (-)
• Pin 6: Audio (+)
• Nominal Input Sensitivity: –8.0dBV (0.4V rms) continuous average is typically the onset of limiting for noise and music
• Input Level: Audio source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
• Amplifier
• Type: 3-channel, Class-D
• Total Output Power: 650W peak
• THD, IM, TIM < 0.02%
• Cooling: Convection
• DC Power
• Connector: Phoenix 5-pin Male; SwitchCraft 5-pin Male; ECO-M 7-pin Male (two pins for 48VDC power, three pins for balanced audio)
• Safety Rated Voltage Range: 48VDC
• RMS Network (Optional) - Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
• Physical
• Dimensions: W: 6.85in (174mm) x H: 18.00in (457mm) x D: 7.70in (196mm)
• Weight: 17lbs (7.7kg)
• Enclosure: Premium multi-ply birch with slightly textured black finish
• Protective Grille: Powder-coated, hex-stamped steel with black mesh
• Rigging: Three 3/8-inch-16 or metric M10 nut plates